OP 21 unwinder

The steel tape unwinder up to 20 mm is designed for unwinding steel strips with a width of 13 to 20 mm. The inner diameter of the winding is not limited; the maximum outer diameter is 700 mm. It prevents unintentional unwinding and contamination of the steel tape.

OP 28 Unwinder

The steel tape unwinder up to 32 mm serves to prevent the unrolling and contamination of steel strips of 25 mm to 32 mm wide. The inner diameter of the winding is not limited; the maximum outer diameter is 700 mm.

Unwinder for PP and PET tapes

The unwinder is used to unwind PP (polypropylene) and PET (polyester) tape. The binding tape is not contaminated after insertion into the unwinder and at the same time, an unwanted unintentional unwinding of the tape from the reel on which it is wound is prevented. The unwinder has a storage section for storing the accessories needed for strapping.

PES tape unwinder

The unwinder is designed to work with polyester textile PES tape with a diameter of 75 mm. The binding tape is not dirty after insertion into the unwinder and at the same time its unintentional unwinding is prevented. The unwinder is easily portable, which facilitates handling during strapping.